4-30
DSR-70/70P
5. Playback the alignment tape XH5-1A2/XH5-1AP2. Select “E”
in the parentheses ( ) in the top right with the [OUT] (→) key
and select DELAY with the [OUT] (→) key at the same time.
Perform adjustment until the data becomes nearly the minimum
value (000X) using the [ENTRY] (↑), [AUTO|EDIT] (↓)
keys.
6. Playback the alignment tape XH5-1A2/XH5-1AP2. Select “O”
in the parentheses ( ) in the top right with the [OUT] (→) key
and select PHASE with the [OUT] (→) key at the same time.
Perform adjustment until the data becomes nearly the minimum
value (000X) using the [ENTRY] (↑), [AUTO|EDIT] (↓)
keys.
7. Playback the alignment tape XH5-1A2/XH5-1AP2. Select “O”
in the parentheses ( ) in the top right with the [OUT] (→) key
and select COS with the [OUT] (→) key at the same time.
Perform adjustment until the data becomes nearly the minimum
value (000X) using the [ENTRY] (↑), [AUTO|EDIT] (↓)
keys.
8. When the adjustment of the above described items are
complete, press the [SET] key to save the adjustment data.
Note : The alignment tape, XH5-1A2 for NTSC, and XH5-
1AP2 for PAL.
To Next Page
