What to do if recording cannot be carried out on Sony STR-DH710?
If recording cannot be carried out on your Sony Receiver: - Check that the components are connected correctly. - Select the source component using the input buttons.
What to do if the surround effect cannot be obtained on Sony STR-DH710?
If the surround effect is not working on your Sony Receiver: - Make sure you have selected the sound field for movie or music mode. - Sound fields do not function for signals with a sampling frequency of more than 48 kHz.
How to fix no picture or unclear picture on Sony Receiver?
If you are experiencing no picture or an unclear picture on the TV screen or monitor connected to your Sony Receiver: - Select the appropriate input using the input buttons. - Set your TV to the appropriate input mode. - Move your audio components away from the TV. - Depending on the DIGITAL MEDIA PORT adapter, video output may not be possible.
Why is there no sound from digital sources on my Sony STR-DH710?
If you're not getting sound from digital sources on your Sony Receiver, check the following: - Ensure that the INPUT MODE is not set to 'ANALOG'. - Verify that the Analog Direct function is not selected. - Check that the 'A. ASSIGN' function is not reassigning the audio input of another source to the selected input. - Set 'ARC' to 'ARC OFF' if there is no sound output from the TV OPTICAL IN jack during TV input.
What to do if my Sony STR-DH710 Receiver remote does not function?
If your Sony Receiver remote isn't working, try these steps: - Ensure the remote is pointed directly at the remote sensor on the receiver. - Remove any obstructions between the remote and the receiver. - Replace the batteries in the remote with fresh ones. - Verify that you have selected the correct input on the remote.
What to do if no sound is heard from the S-AIR product connected to Sony Receiver?
If no sound is heard from the S-AIR product: - If you use another S-AIR main unit, place it more than 26 feet (8 m) away from this S-AIR main unit. - Confirm the S-AIR IDs of the S-AIR main unit and S-AIR sub unit. - Confirm the pairing setting. - Place the S-AIR main unit and S-AIR sub unit closer to each other. - Avoid use of equipment that generates electromagnetic energy, such as a microwave oven. - Place the S-AIR main unit and S-AIR sub unit separately from other wireless devices. - Avoid using any other wireless devices. - Change the 'RF SETUP' setting. - Change the S-AIR ID settings of the S-AIR main unit and S-AIR sub unit. - Turn off the system and S-AIR sub unit, then turn on them. - Check that headphones are not connected to the S-AIR sub unit.
What to do if no sound is heard from the S-AIR receiver connected to Sony Receiver?
If no sound is heard from the S-AIR receiver, check that the components are connected to this receiver.
Why is RDS not working on my Sony STR-DH710 Receiver?
If RDS is not working on your Sony Receiver: - Make sure that you are tuned to an FM RDS station. - Select a stronger FM station.
Why is there no sound from DIGITAL MEDIA PORT adapter on Sony STR-DH710?
If there's no sound from a component connected to the DIGITAL MEDIA PORT adapter on your Sony Receiver: - Adjust the volume of this receiver. - If the DIGITAL MEDIA PORT adapter and/or component is not connected correctly, turn off the receiver, then reconnect the DIGITAL MEDIA PORT adapter and/or component because the DIGITAL MEDIA PORT adapter and/or component is not connected correctly. - Check the DIGITAL MEDIA PORT adapter and/or component device to make sure it supports this receiver.
How to fix no sound from center/surround speakers on Sony Receiver?
If there is no sound or very low sound from the center, surround, surround back, or front high speakers on your Sony Receiver: - Select a CINEMA STUDIO EX mode. - Check that the speaker settings are appropriate using the AUTO CAL menu or 'PATTERN' in the SPEAKER menu. Then check that sound is output from each speaker correctly, using 'T. TONE' in the LEVEL menu. - Adjust the speaker level.
Model name of the AV receiver.
Safety precautions for preventing fire or electric shock.
Information specific to customers in the United States.
Information regarding the manual's content and model.
Explanation of area codes for receiver operation.
Switching inputs, DMPORT, and bi-amplifier connections.
Remote operation, memory clearing, glossary, and troubleshooting.
Identification and function of front panel controls and indicators.
Explanation of indicators showing playback channels and speaker setup.
Explanation of indicators for input signals (HDMI, COAX, OPT).
Description of S-AIR, DMPORT, antenna, audio, video, and speaker sections.
Using the SHIFT and TV buttons for special functions.
Explanation of receiver control buttons like I/O, Input, ENTER.
Detailed explanation of receiver control buttons and their functions.
Functions for controlling a Sony TV using the remote.
Mapping remote buttons to control various Sony components.
Guidelines for setting up speaker systems, including 7.1 channel.
Proper connection of speaker cords and terminals.
Using the SPEAKERS button to select the speaker system.
Illustration showing how to connect the TV via various signal types.
Connecting CD players, CD recorders, and DMPORT adapters.
Connecting components via HDMI and its features.
Illustration for connecting Blu-ray players via video and audio jacks.
Illustration for connecting DVD players/recorders via video and audio jacks.
Illustration for connecting tuners via video and audio jacks.
Illustration for connecting VCRs and camcorders via analog jacks.
Connecting AM loop and FM wire antennas.
Procedure for inserting the S-AIR wireless transmitter.
Instructions for connecting the AC power cord to a wall outlet.
Procedure to reset receiver settings to initial defaults.
How to select the front speaker system configuration.
Overview of the Auto Calibration technology and its functions.
Items to check before performing speaker calibration.
Steps for connecting the microphone and executing calibration.
How to view and confirm the results of the auto calibration.
Explanation of different result items like EXIT, LVL INFO, DIST.INFO.
Explanation of error codes (E-31, E-32, E-33) during calibration.
Steps to re-perform auto calibration after an error.
Checking speaker phase (P. INFO.) and warnings (WARN CHK).
Setting calibration types and managing listening positions.
Renaming the registered listening positions.
Adjusting speaker levels using the test tone function.
Adjusting speaker levels based on test tone output.
Resolving issues when test tone is not output or plays incorrectly.
Steps to turn on components, receiver, and select sources for playback.
Activating muting and protecting speakers from damage.
Entering custom names for input sources on the receiver.
Changing the information displayed on the receiver screen.
Configuring the receiver to turn off automatically.
Procedure for recording audio onto a CD-R.
Instructions for tuning into FM and AM radio stations.
Methods for tuning radio stations automatically or directly.
Tips for improving poor FM stereo reception.
Adjusting the AM tuning scale between 9 kHz and 10 kHz.
Steps to preset and store FM/AM radio stations.
Methods for selecting stored stations and assigning names.
Receiving RDS broadcasts and displaying program service names.
Choosing from preprogrammed sound fields for surround sound.
Explanation of 2-channel stereo and Analog Direct modes.
Using A.F.D. Auto and Movie sound field modes.
Sound fields available when using headphones.
Notes on subwoofer output and sound field usage.
Procedure to reset all sound fields to their initial settings.
Explanation of the BRAVIA Sync compatibility and features.
Setting up BRAVIA Sync based on TV's HDMI-Easy Setting compatibility.
Starting components automatically with one-touch playback.
Using System Audio Control to output TV sound via receiver speakers.
Automatically turning off the receiver and components with the TV.
Switching sound fields for movies using THEATER/THEATRE button.
Enabling ARC to output TV sound through receiver speakers via HDMI.
Introduction to S-AIR products for wireless sound transmission.
Factors affecting S-AIR reception and potential interference.
Setting IDs for S-AIR main unit and sub unit for transmission.
Procedure to set the ID for the S-AIR main unit.
Procedure for pairing S-AIR main unit with a specific sub unit.
Detailed steps to perform S-AIR pairing and exit the menu.
Enjoying sound in another room using the S-AIR receiver.
Methods for controlling the system from the S-AIR receiver.
Adjusting RF SETUP to improve sound transmission stability.
Tips for improving unstable S-AIR reception.
Enjoying S-AIR receiver when the main unit is in standby.
Changing the audio input mode (AUTO, ANALOG).
Assigning audio/video signals to different input jacks.
Steps to reassign input names and jacks for components.
Connecting and enjoying audio/images via DMPORT adapter.
Setting up bi-amplifier connection for front speakers.
Procedure for using the amplifier's setting menu.
How to return to previous displays or exit menus.
Details of parameters within the AUTO CAL menu.
Details of parameters within the LEVEL menu for speaker adjustment.
Setting speaker pattern, size, assignment, and distance.
Selecting sound fields, adjusting EQ, and tuner settings.
Configuring HDMI control, display, sleep timer, and auto standby.
Configuring S-AIR ID, pairing, mode, and RF setup.
Using test tone to adjust individual speaker levels.
Adjusting dynamic range compression for movie audio.
Table showing speaker pattern configurations and connections.
Setting speaker sizes (LARGE/SMALL) and their effects.
Setting crossover frequencies and surround back assignments.
Setting speaker distances and unit of measure.
Setting bass crossover frequencies for front speakers.
Selecting sound fields and adjusting surround effects.
Adjusting audio sync, dual language, and digital input priority.
Night mode settings and video input assignment.
Configuring HDMI control and pass-through settings.
Setting HDMI audio output and subwoofer levels.
HDMI subwoofer filter settings and Audio Return Channel.
Adjusting display brightness, sleep timer, and auto standby.
Customizing remote button assignments for components.
Mapping remote buttons to control various components.
Procedure to clear all contents of the remote's memory.
Definitions of component and composite video formats.
Explanation of Deep Color and various Dolby audio technologies.
Explanation of DTS formats and HDMI interface.
Details on S-AIR technology and sampling frequency concepts.
Safety guidelines regarding objects, liquids, and power sources.
Recommendations for optimal receiver placement, operation, and cleaning.
Factors affecting S-AIR transmission and interference.
Steps to resolve no sound issues with components or speakers.
Troubleshooting no sound from analog 2-channel sources.
Resolving issues with digital sources and unbalanced audio.
Troubleshooting subwoofer sound and surround effect problems.
Resolving DMPORT sound, video display, and FM reception problems.
Resolving RDS not working and tuning issues.
Troubleshooting HDMI connection and Control for HDMI function.
Resolving no sound issues with System Audio Control.
Troubleshooting no image/sound in standby and S-AIR connection.
Resolving no sound or noise issues with S-AIR products.
Interpreting display messages and troubleshooting remote control.
Handling persistent problems and clearing receiver memory.
Detailed specifications for audio power output and tuner sections.
Specifications for video inputs/outputs, dimensions, and power.
Basic steps for installing speakers for optimal sound.
Guidelines for connecting speakers to the receiver.
Basic steps for connecting various audio/video components.
Steps for calibrating speaker settings automatically.
Setting up connected components for proper sound output.
General| Disc types supported | BD-R |
|---|---|
| Number of optical discs | 1 discs |
| Optical disc player type | Blu-Ray player |
| Display | FLD |
| AV output | 1 |
| Tuner type | Analog |
| Built-in HDD | No |
| TV tuner integrated | - |
| Apple docking compatibility | Not supported |
| 3D | Yes |
| Audio decoders | Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, DTS, DTS Neo:6, DTS-ES, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD |
| RMS rated power | - W |
| Audio output channels | 7.1 channels |
| Subwoofer frequency range | 40 - 200 Hz |
| Product color | Black |
| Receiver dimensions (WxDxH) | 430 x 322 x 157.5 mm |
| HDMI in | 3 |
| SCART ports quantity | 0 |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 240 W |
| Package weight | 10000 g |
Weight and Dimensions| Receiver weight | 8000 g |
|---|
To Next Page
