Name: SoundCraft Vi3000
Brand: SoundCraft
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Vi3000 USER MANUAL

12.0 12.0: METERING

12.0: METERING

Level metering in the Vi 3000 goes from +18dB to -36 dB. It represents the actual output level in dBu from its analogue

line output. Gain reduction is displayed in the Range 0 - 20dB. The Vi 3000 uses full oating-point calculations in its

DSP, which means that the audio signal inside the mixer cannot be overloaded. If the signal level is too high at the

master output meters, it is necessary only to pull down the master fader level until the correct level is obtained.

There are meters on every channel and bus master, plus metering for every console path in the default Master Bay

touchscreen areas.

The touchscreen meters can be touched to assign the third (right-hand-end) input bay mapping.

Console Metering

Questions and Answers:

Need help?

Do you have a question about the SoundCraft Vi3000 and is the answer not in the manual?

SoundCraft Vi3000 Specifications

General