7.3.2 7.3.2: OUTPUTS > MASTERS > CHANNEL
7.3.2: OUTPUTS > MASTERS > CHANNEL
ISO: Isolate
Bus
Isolate this bus from
snapshot recall and
Show recall (when
Global Filtering is
active)
See the Snapshot and Global Filtering chapter for more
information.
Mute Safe LED
Indicate when Mute
Safe is active for this
bus.
When the Mute Safe system is enabled (in Monitoring
section [SETUP]), then the channel strip SOLO/SEL
button activates the Mute Safe status for that channel.
Bus Fader
Control the the bus
master output level.
FaderGlow
The channel fader is
colour-coded depending
on its function.
Input channel levels are not colour-coded. The other
FaderGlow colours are Aux Sends: ORANGE; Groups:
GREEN; Matrix Contribution: CYAN; VCA Master 1-8:
BLUE; VCA Master 9-16: PINK.
Bus MUTE/VCA
Display
Shows mute group and
VCA group assignment
for this channel.
Bus SOLO/SEL
Defaults to adding the
a SOLO enable for the
channel.
If a touch-panel screen is open for the for another chan-
nel in the same bay, the [SOLO/SEL] button moves the
touch screen to this channel. The button has other func-
tions in other console modes such as selecting channel
for a Copy or Paste edit function. Other functions for
the [SOLO/SEL] button are detailed in the appropriate
reference sections.
To Next Page
Loading...
Need help?
General