6.2 6.2: INPUT CHANNEL > CHANNEL STRIP
6.2: INPUT CHANNEL > CHANNEL STRIP
Mute/VCA
Group Indica-
tors Field / Group:
Shows the Mute or VCA
Groups that is channel
belongs to.
The actual target of these LEDs (Mutes, VCAs 1-8, or
VCAs 9-16) is determined by the DISPLAY buttons in the
MUTE & VCA GROUPS button group. See the Mute &
VCA Groups reference section 9 for more information.
Channel Fader Field / Group:
Control the channel
output level.
The input channel faders can also be assigned to follow
the bus master selection in the Master Bay with the fader
[FLW] button and become level controls for contributions
to that bus.
FaderGlow Field / Group:
The channel fader is
colour-coded depending
on its function.
Input channel levels are not colour-coded. The other
FaderGlow colours are Aux Sends: ORANGE; Groups:
GREEN; Matrix Contribution: CYAN; VCA Master 1-8:
BLUE; VCA Master 9-16: PINK.
Solo / Select Field / Group: Active
Default is the channel
Solo function (listen to
this channel only on the
monitor bus).
If a touch-panel screen is open for the for another chan-
nel in the same bay, the [SOLO/SEL] button moves the
touch screen to this channel. The button has other func-
tions in other console modes such as selecting channel
for a Copy or Paste edit function. Other functions for the
[SOLO/SEL] button are detailed in the appropriate refer-
ence sections. For more on the console Solo System see
reference section 11 for more information.
Solo Enable
or Select
To Next Page
Loading...
Need help?
General