Vi3000 USER MANUAL
6.5.4: INPUT CHANNEL > BUSSES
Stereo Aux
Send Balance Field / Group: Aux n Range Low Range High
Adjust balance of the
numbered stereo aux
send.
The Stereo symbol above the encoder shows that this
aux send has been combined with its numerical neigh-
bour to create a stereo aux send. The 'neighbour' aux
send space will either be blank or show a balance con-
trol, depending on the busses' 'channel pan' status. If
the aux has been set to follow the input channel panning,
there will be no balance control.
30L 30R
Group Buss
Routing Field / Group: Group n Inactive Active
Route the input channel
signal to the numbered
group bus.
The corresponding group assign bar in the bus touch
screen area is extended and highlighted in blue when the
numbered groups bus routing is enabled for this channel.
Off On
Stereo Group
Buss Routing Field / Group: Group n Inactive Active
Route the input channel
signal to the numbered
stereo group buss.
The Stereo symbol above the encoder indicates that
this group has been paired with its neighbour to create
a stereo group buss that follows channel panning. The
neighbouring group display will be blank.
Off On
Buss 'Blank' Field / Group: Inactive Active
Shows this buss has
been assigned as a
Matrix buss.
- -
To Next Page
Loading...
Need help?
General