17.2.2 17.2.2: FX > ALGORITHMS > DELAYS
17.2.2: FX > ALGORITHMS > DELAYS
Delays repeat a sound a short time after it rst occurs. Delay becomes echo when the output is fed back into the input
(feedback). This turns a single repeat into a series of repeats, each a little softer than the last.
Studio Delay
Stereo
The Studio Delay features up to 1 second of stereo delay and offers a built-in ducker that attenuates the delay output
whenever signal is present at the input. This can be used to keep the original signal from being muddied up by delay
repeats.
2-Tap Delay
Stereo
The 2-Tap Delay is probably best described as an adjustable pong delay where each tap can be individually set in
relation to the delay time. The 2 taps are a calculated percentage of the actual delay time from 1-100% (for example,
if the delay time is 500ms and Tap 1 is set to 50% and Tap 2 is set to 100%, Tap 1 time would be 250ms and Tap 2
time would be 500ms). Narrow spacing of the tap percentages can widen the stereo image of the delay while wider tap
spacing can create rhythmic delay lines.
Modulated Delay
Stereo
The Modulated Delay is enhanced by an LFO (low frequency oscillator) that produces a chorusing effect on the delay
repeats. This is a great delay for guitar and instrument passages that need that “special something.”
Mono Delay
Mono In/Stereo Out
The Mono Delay is the cleanest, most accurate of the delay programs, with up to 1 second of mono delay with panned
output, and the built-in ducking feature.
Pong Delay
Mono In/Stereo Out
This delay effect pans the delay repeats from left to right, while the input signal remains at its original(center) position.
DELAYS
To Next Page
Loading...
Need help?
General