7.1 7.1: OUTPUTS > LCR MASTERS
7.1: OUTPUTS > LCR MASTERS
Isolate Active
Isolate the LRC Masters
from snapshot recall
or Show Recall (with
global ltering acive).
See the Snapshots / Global Filtering reference for more
detail.
Channel
isolated
On Inactive Active
Bus On/Off (Mute). Off (Muted) On
LCR Select Active0
Access the LCR Master
Busses processing
page.
Gives access to the procesing blocks in the Master LRC
outputs via the touch screen area of the Master Bay
Vistonics.
GEQ In
LCR Fader
Control the output levels
of the LRC Masters
The output levels of the LRC Master outputs are always
controlled by their dedicated faders. Those faders are
never used for anything else.
L/C/R Link
setup
Set up LRC Master bus
EQ and GEQ linking.
Left and Right busses can be linked, or the Centre bus
can be added to the linked L and R so that all three
busses can be adjusted together. It is not possible to link
Left and Centre or Right and Centre. The defualt state,
loaded with Default Show Files, is for LINK to be set to
ON for LCR busses, both EQ and GEQ.
Access EQ
Adjust the parameteric
EQ for this Master.
The output bus parametrc EQ is the same is used for the
input channel EQ. Please see the input channel refer-
ence for more detail.