SoundCraft Vi3000 User Manual

4.3: INPUT CHANNEL > DYNAMICS
Vi3000 USER MANUAL
®
4.3 INPUT CHANNEL > De Esser
Vi3000 USER MANUAL
®
18.2.2 18.2.2: VM ² > STATUS > VST
18.2.2: VM ² > STATUS > VST
To see more detailed information about the AKG Microphones, the Input section of the channel strip can be zoomed
by touching the Input touch eld at the top of the strip. Three special Vistonics elds are added to the zoom view of
channels that are patched to AKG-associated connectors, giving more detailed information of RF level(bargraph and
numerical signal strength in dB), Battery level (bargraph icon plus numerical readout of remaining battery life in hours),
and the internal gain of the microphone.
Note that this information is display-only, there is no control possible over the AKG microphones, other than with the
Locate (LOC) button. Note also that the input gain control of the Vi microphone input preamp will be automatically set
to 0dB gain and is not available for control on channels that have AKG microphones assigned.
VM² VST Section Information

SoundCraft Vi3000 Specifications

General

Busses	24 mono/stereo
Fader Layers	4
Touch Screens	2
Sample Rate	96 kHz
Bit Depth	24-bit
Faders Type	Motorized
Digital I/O	AES/EBU
Remote Control	Via ViSi Remote iPad app
Faders	36
EQ	4-band parametric
Output Channels	24 mono/stereo busses + matrix
Connectivity	Ethernet, USB
Mixing Channels	Up to 96
Effects	Lexicon FX engine
Routing	Fully flexible
Input Channels	Up to 96