SoundCraft Vi3000 User Manual

5.5 5.5 Operations Overview > Buttons
®
Vi3000 USER MANUAL
5.5 Operations Overview > Buttons
Input Channel VISTONICS Group
The input channel VISTONICS control buttons provide convenient ways of assigning bus
master functions to the input channel VST encoders, such as selections for individual bus ‘tap’
points, and getting the input bus contribution shown on the VST screen to follow the master
bus selection in the Master Bay.
For more information, see the Inputs reference chapter 6.
Output Vistonics Group
These buttons provide control over the VST section functionality of the Master Bay vistonics
screens. For example, the [PAGE A] and [PAGE B] buttons switch between busses 1-16 and
17-24. For More information, see Outputs Reference chapter 7.
Encoder Mode Buttons
These buttons assign various functions to the input channel strip encoders. For more informa-
tion see the Inputs reference chapter 6.
Mute & VCA Groups
Control and assign the four mute groups and available 16 VCAs. For more information see the
Mute & VCA Groups reference chapter 9.

SoundCraft Vi3000 Specifications

General

Busses	24 mono/stereo
Fader Layers	4
Touch Screens	2
Sample Rate	96 kHz
Bit Depth	24-bit
Faders Type	Motorized
Digital I/O	AES/EBU
Remote Control	Via ViSi Remote iPad app
Faders	36
EQ	4-band parametric
Output Channels	24 mono/stereo busses + matrix
Connectivity	Ethernet, USB
Mixing Channels	Up to 96
Effects	Lexicon FX engine
Routing	Fully flexible
Input Channels	Up to 96