Name: SoundCraft Vi3000
Brand: SoundCraft
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Vi3000 USER MANUAL

10.2.1 10.2.1: MONITORING > MON SETUP

10.2.1: MONITORING > MON SETUP

Outputs Solo

Assign

Assign individual Output

Solos to Monitor A,

B, and Headphones

outputs.

When selected, an output assignment screen is dis-

played in the master touch screen area. You can select

individual output buss solos for the specic monitor

output. This is useful for stage monitoring applica-

tions where the solos of in-ear monitor mixes could be

programmed to appear only on Monitor B for example,

which could have an in-ear headphone system connect-

ed to it. In this example, conventional wedge monitor

mixes could be programmed to appear only on Monitor

A when soloed, where Monitor A could be connected to a

wedge speaker system.

DIM Level Range Low Range High

Adjust the monitoring

DIM Level between 0

and –innity.

The DIM function is only activated if the Return Talkback

function is activated via the GPIO facility.

-innty 0dB

SoundCraft Vi3000 Specifications

General

SoundCraft Vi3000 User Manual

Questions and Answers: