13.2 13.2: EDIT > LIBRARY BASICS
13.2: EDIT > LIBRARY BASICS
The Libraries functionality enables various elements of the console, eg EQ section, Dynamics section, or complete
channels and busses, to be copied from the desk and stored in the Library system. Later these items can be retrieved
and pasted from the Library to any destination channel or bus on the console. You can also export complete Libraries
or individual entries to a USB stick, allowing you to move Libraries between consoles.
The {LIB} button appears in the bottom left corner of the VST section in the Master Bay Vistonics screen when in ei-
ther Copy or Paste mode. It works in much the same way as the basic copy and paste mode. To Paste from the library
simply hit the [PASTE] button, select a library item, then touch a target on the console. To Copy to the Library, put the
console in Copy mode, select console blocks (see the Copy/Paste section) then hit the {LIB} button. The selection will
be saved to the currently loaded Library. To save selections to a different Library, you must load that library - or create
a new one - rst.
Libraries
Library Access ACTIVE
Access Library functionality while in Copy (Copy
To Library) or Paste (Paste from Library) modes.
Include Send
Levels
Include Send Levels in Library Copy and Paste
operations.
To Next Page
Loading...
Need help?
General