18.2.1 18.2.1: VM ² > STATUS > CHANNEL STRIP
18.2.1: VM ² > STATUS > CHANNEL STRIP
RF Strength
Show the RF (Radio
Frequency) status of
the connected wireless
microphone.
A red or green ‘RF’ icon is displayed to indicate the
health of the AKG RF level. A green RF indicator is dis-
played when the signal strength at the receiver is strong
enough to enable audio transmission. A red RF indicator
is displayed when the signal strength is too low for audio
transmission or if the transmitter if switched off. The
actual value in dB of the RF signal strength is displayed
in the VST section when the input block is selected.
Battery Level
Seven-segment
transmitter battery level
indication.
Red segments 0-1 indicate one hour or less remaining.
The Amber segment (segment 2) indicates 25 percent of
battery life remaining. The Green segments (segments
3-7) indicate 35-100 percent of battery life remaining.
The number of hours remaining in the transmitter battery
is displayed in the VTS section when the input block is
selected and varies with the type of battery used.
Network Error
Indicates a Network
error.
The system is able to differentiate between a network
error/disconnection and out of range RF or a switched-off
transmitter. In the case of a network error, the AKG ele-
ments only within the input strip overview on all channels
will change to a greyed-out condition.
To Next Page
Loading...
Need help?
General