Vi3000 USER MANUAL
6.5.3: INPUT CHANNEL > DYNAMICS
De-Esser Sensi-
tivity Field / Group: SENS Range Low Range High
Adjust the sensitivty of
the De-esser process.
0% 100%
De-Esser In Field / Group: DEES Inactive Active
Activates the De-esser
process
Out In
De-Esser Range Field / Group: RNG Range Low Range High
Adjusts the De-esser
attenuation.
The maximum amount by which the signal in the 'Ess'
band is attenuated when the DeEsser is activated.
-18dB 0dB
Ess Band Solo Field / Group: RNG Inactive Active
Solo the De-esser
dynamic lter.
Helps pinpoint the 'Ess band' most suited to the current
signal.
Off Solo
De-Ess Filter
Frequency Field / Group: FREQ Range Low Range High
Adjust the centre
frequency of the De-ess
dynamic lter.
20Hz 20kHz
External Key
Assign Field / Group: MODE Inactive Active
x
Activate the External
Key Assign screen in
the main Vistonics touch
sreen panel.
All external I/O options for the external key become
available for selection.
+ -
DE-ESS Function
The de-esser is a dynamically controlled lter normally used to reduce the sibilance (‘sss’ components) in
a singer’s voice. If the de-esser is active, the signal level will be reduced only in the band set by the lters,
when the signal in this band exceeds the required threshold.
To Next Page
Loading...
Need help?
General