SoundCraft Vi3000 User Manual

Vi3000 USER MANUAL
®
14.3.1 14.3.1: CUES > CUE NUMBER/TIMECODE
14.3.1: CUES > CUE NUMBER/TIMECODE
Enable Cue Inactive Active
Enable or disable this
cue.
Enabled cues are shown in white in the cue list. Disabled
cues are shown 'greyed out'.
Cue Disabled Cue Enabled
Enable Cue Inactive Active
Enable or disable this
cue.
Enabled cues are shown in white in the cue list. Disabled
cues are shown 'greyed out'.
Cue Disabled Cue Enabled
Go To Cue
Number Select Range Low Range High
Set a following cue
number - to be recalled
a set amount of time
after this cue has been
recalled.
Can be very useful for ring a number of events from one
cue activation.
First Cue Last Cue
'Go To Cue' On Inactive Active
Activate the GO TO
CUE functionality for
this cue.
OFF ON
'Go To Cue'
Time Range Low Range High
The amount of time that
will elapse before the
'GO TO CUE' cue is
recalled.
0.5 Secs 30 Secs

SoundCraft Vi3000 Specifications

General

Busses	24 mono/stereo
Fader Layers	4
Touch Screens	2
Sample Rate	96 kHz
Bit Depth	24-bit
Faders Type	Motorized
Digital I/O	AES/EBU
Remote Control	Via ViSi Remote iPad app
Faders	36
EQ	4-band parametric
Output Channels	24 mono/stereo busses + matrix
Connectivity	Ethernet, USB
Mixing Channels	Up to 96
Effects	Lexicon FX engine
Routing	Fully flexible
Input Channels	Up to 96