17.0 17.0: FX
17.0: FX
The Vi3000 comes with Lexicon FX processors. Each FX Unit can be inserted into any Output/Main Master bus or into
any Input Channel, or it can be patched as an FX Return to an Input Channel or fed from an Aux send.
Each FX Unit supports up to 30 different professional LEXICON® Effects with algorithm and parameter adjustment
integrated into the console’s Vistonics II environment - editable either from the relevant channel’s bay, or from the
Master Bay via the FX Overview page in the main menu.
All Parameters from the four Effects Units and for all Effects Type are stored in the desk Snapshots.
LEXICON® Effects Format
Depending on the selected effect type, the FX processor works internally in one of three formats: Mono, Mono In/Ste-
reo Out, or Stereo In/Stereo Out.
The FX processor always has Stereo Inputs and Outputs. If the FX Type needs only a Mono Input, the Left and Right
Input Signal are summed together. If the FX Type outputs only a Mono Signal then the Output Signal is distributed to
both the Left and Right Outputs. The MIX Parameter adjusts the ratio between the original (dry) signal and the effects
(wet) signal. The stereo format of the dry signal wil be maintained.
Lexicon FX
To Next Page
Loading...
Need help?
General