SoundCraft Vi3000 User Manual

Vi3000 USER MANUAL
®
17.2.3 17.2.3: FX > ALGORITHMS > MISC
17.2.3: FX > ALGORITHMS > MISC
Number Of
Voices
Controls the number
of additional Chorus
voices.
Hgher amounts add more richness to the Chorus effect. 0 99
Regeneration Range Low Range High
Controls the amount of
modulated signal being
fed back into the input,
creating feedback.
Higher amounts add more resonance to the signal. -99 +99
Diffusion
Creates a time-smooth-
ing effect similar to
diffusion in reverb.
Diffusion can be a subtle effect to add a little warmth to
the chorus.
0 99
Pre Delay Range Low Range High
Determines the amount
of offset between the
two signals that create
the ange effect.
Lower values create a tighter effect, higher values result
in a more extreme “whooshing” sound.
0mS 20mS
LFO Waveform
Selects the wave
pattern used by the
modulated effect.
Select from sine wave, triangle wave, and random.
Phase Range Low Range High
Controls whether am-
plitude or depth change
occurs in both left and
right outputs simulta-
neously or alternates
between left and right
outputs.
0 Degrees 180 Degrees

SoundCraft Vi3000 Specifications

General

Busses	24 mono/stereo
Fader Layers	4
Touch Screens	2
Sample Rate	96 kHz
Bit Depth	24-bit
Faders Type	Motorized
Digital I/O	AES/EBU
Remote Control	Via ViSi Remote iPad app
Faders	36
EQ	4-band parametric
Output Channels	24 mono/stereo busses + matrix
Connectivity	Ethernet, USB
Mixing Channels	Up to 96
Effects	Lexicon FX engine
Routing	Fully flexible
Input Channels	Up to 96