Serial peripheral interface / integrated interchip sound (SPI/I2S) RM0440
1790/2126 RM0440 Rev 4
Bits 7:0 I2SDIV[7:0]: I2S linear prescaler
I2SDIV [7:0] = 0 or I2SDIV [7:0] = 1 are forbidden values.
Refer to Section 39.7.3 on page 1769.
Note: These bits should be configured when the I2S is disabled. They are used only when the I2S is
in master mode.
They are not used in SPI mode.
To Next Page
Loading...
