142 MS 441, MS 441 C
No. Part name Part No. Use Remarks
20 Locking strip for assembly stand 5910 850 1650 Clamping machine on assembly stand
21 Ignition system tester ZAT 4 5910 850 4503 Testing ignition system
22 Ignition system tester ZAT 3 5910 850 4520 Testing ignition system
23 Torque wrench 5910 890 0302 Screw connections (0.5 to 18 Nm)
24 Torque wrench 5910 890 0312 Screw connections (6 to 80 Nm)
25 Assembly tool 12 5910 890 2212 Fitting hookless snap rings in piston
26 Screwdriver 5910 890 2304 Carburetor adjustment
- Setting washer 5910 893 6600 Supplement to screwdriver
(carburetor adjustment)
27 Screwdriver bit T 27 x 150 5910 890 2400 IS-P screws (4 mm)
28 Assembly hook 5910 890 2800 Disconnecting helical springs from
clutch shoes
29 Assembly stand 5910 890 3100 Mounting chainsaw for repairs
30 Puller 5910 890 4400 Pulling out oil seals
- Claws (with profile No. 3.1) 0000 893 3706 Pulling out oil seal(s)
31 Puller 5910 890 4500 Pulling off limiter caps
32 Crimping pliers 5910 890 8210 Cable ties, cable lugs, etc.
33 Stud puller M8 5910 893 0501 Unscrewing bar mounting studs
34 Screw sleeve 5910 893 2420 Pulling in crankshaft
35 Socket, 13 mm, long 5910 893 2804 Removal and installation
of decompression valve
36 Assembly hook 5910 893 8800 Pulling out pick-up body
Remark:
1) Only to be used for releasing.
To Next Page
Loading...
Need help?
General
