Stihl MS 441 User Manual

88 MS 441, MS 441 C
– Examine throttle trigger (1),
lever (2) and leg spring (3),
replace if necessary.
219RA440 TG
1
3
2
: Hook leg spring (1) into throttle
trigger (2), noting the installed
position (arrow).
219RA441 TG
2
1
: Push lever (1) into place.
– Turn throttle trigger with lever
over.
219RA442 TG
1
: Push throttle cable (1) into hole
(arrow) until the wire (2) engages
the guide of the lever (3).
219RA352 TG
12
: Fit throttle trigger (1) with lever
(2) so that the leg spring is
located in the guide (arrow).
219RA444 TG
1
2
: Centre the throttle trigger (1) with
punch (2).
– Drive in the pin until it is
equidistant on both sides.
219RA445 TG
2
1
: Centre lever (1) with punch (2).
– Drive in the pin until it is
equidistant on both sides.
– Check correct operation.
– Grease roller (arrow) before
219RA446 TG
2
1
installing it, b 17.

Stihl MS 441 Specifications

General

Displacement	70.7 cc
Weight	6.6 kg
Fuel Capacity	0.78 L
Chain Oil Capacity	0.36 l
Oil Capacity	0.36 l
Oil tank volume	0.36 l
Chain pitch	3/8"