Strasbaugh Introduction
Version 1.2 - April 18, 1996; Update 11/6/96 1 - 13 U
Alert Graphic:
Symbol:
• pinch points
When To Be Aware:
• while the table is being removed or installed.
• when moving the machine or associated equipment (as in during
installation).
Notes:
Lifting the polish table(s) presents the potential for a lifting strain hazard;
use the crane to avoid a strain. A table falling during the lifting process
presents the potential of crushing body parts; keep body parts out from
under the table at all times.
When moving the machine or associated equipment, always use a forklift.
If the forklift is used from the front, confirm that forks extend to rear
channel before moving. If the forklift is used from either of the two sides,
confirm that the forks extend to the center channel before moving.
Alert Graphic:
Symbol:
• electrical hazard
When To Be Aware:
• while working inside the electrical cabinets.
• while working with the table motor(s), spindle motors, slurry pump
motors, pad conditioner linear actuator and conditioning device rotate
motor, table coolant valves, lube pump, control computer, and monitor(s).
To Next Page
Loading...