Strasbaugh 7AA - Adjust R.P.M.s

Strasbaugh Machine Setup
Version 1.2 - April 18, 1996 5 - 5
ADJUST R.P.M.'S
To display the machine operation menu, press the reset key.
Turn the key switch to "PROG" and press the "8" key. This will
display the R.P.M. settings menu. This menu lists six options:
1) Grind spindle coarse
2) Grind spindle finish
3) Spin chuck rinse
4) Spin chuck dry
5) Work spindle grind
6) Work spindle rinse
Pressing keys 1 through 6 will turn on the corresponding motor.
This enables the operator to read the R.P.M. setting on the
digital tachometer.
Motor speed may be adjusted by turning the corresponding
potentiometer on the control panel. After setting the speed,
press "ENT" to turn off motor.