K-6 Sun StorEdge 3000 Family Installation, Operation, and Service Manual • May 2004
Note – While your system is starting up, you should see your new Fibre Channel
devices.
You are now ready to partition and format your new devices.
2. Open the Disk Administrator application.
a. Click Start.
b. Choose Administrative Tools from the Programs menu.
c. Choose Disk Administrator.
A “Disk Administrator is initializing” progress indicator is displayed.
A Disk Administrator window then displays the drives recognized by the system.
3. Select the disk whose free space you want to partition and format.
a. Choose Create from the Partition menu.
A Create Primary Partition dialog box enables you to specify the size of the
partition.
b. Specify a size or accept the default.
c. Click OK to create the partition.
The partition is now identified as Unformatted in the Disk Administrator
window.
To Next Page
Loading...
