Sun Microsystems Sun Fire X4150 - Returning the Server to Operation

6-1
CHAPTER
6
Returning the Server to Operation
This chapter describes how to return the Sun Fire X4150 Server to operation after you
have performed service procedures.
The following topics are covered in this chapter:
■ Section 6.1, “Installing the Top Cover” on page 6-2
■ Section 6.2, “Reinstalling the Server in the Rack” on page 6-3
■ Section 6.3, “Returning the Server to the Normal Rack Position” on page 6-5
■ Section 6.4, “Powering On the Server” on page 6-6
Caution – Never attempt to run the server with the covers removed. Hazardous
voltage present.
Caution – Equipment damage possible. Covers must be in place for proper air flow.