Index-2 Sun Fire X4150 Server Service Manual • November 2009
hot-swappable, 3-1
hot-swappable devices, 3-2
hot-swapping
fan tray, 3-10
I
important safety information, 2-2
installing
drives backplane, 5-10
DVD/USB module, 3-20
fan tray, 3-12
fan tray connector boards, 5-3
FB-DIMMs, 4-8
motherboard assembly, 4-25
PCI-E and PCI-X cards, 4-19
power supply, 3-17
installing to a rack, C-1
L
latch, 3-6
slide rail, 2-6
LED
Fan Fault, 3-10
Locator, 3-13
Power Supply Failure, 3-14, 4-28
Service Required, 3-13, 3-14, 4-28
System Power Supply Failure, 3-14
Top Fan, 3-13
location of drives, 3-6
Locator LED, 3-13
Locator LED/Locator button, 3-13
M
maintenance position, 2-5, 2-7
Memory, 1-1
P
POST
changing options, B-3
codes table, B-4
overview, B-1
redirecting console output, B-2
Power Supply Faliure LED, 3-14, 4-28
powering off server
from service processor prompt, 2-4
service processor command, 2-4
power-on self-test, See POST
R
rack installation, C-1
redirecting console output, B-2
reinstalling server in rack, 6-3
removing
battery, 4-21
drives backplane, 5-9
DVD/USB module, 3-19
fan tray, 3-11
fan tray connector boards, 5-1
FB-DIMMs, 4-7
motherboard assembly, 4-22
PCI-E and PCI-X cards, 4-18
power distribution board, 5-13
server from rack, 2-6
Removing a Hard Drive or SSD, 3-5
required tools, 2-2
S
safety symbols, -xii
sample BIOS setup screens, C-5
Service Required LED, 3-10, 3-13, 3-14, 4-28
Servicing Cables, 5-18
Servicing CPUs, 4-27
SP
recovering from a corrupt, 4-37
System Power Supply Failure LED, 3-14
T
Top Fan LED, 3-10, 3-13
To Previous Page
Loading...
