1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User’s Manual
5-128
Basic Settings
Clicking the BASIC SETTINGS tab brings up the RIP BASIC SETTINGS page (Figure 5-107).
The parameters for this page are shown in Table 5-89.
Figure 5-107. RIP Basic Settings Page
Table 5-89. RIP Basic Settings Page Parameters
Parameter Description
Admin Status This parameter enables/disables the admin status.
Space Periodic
Updates
This parameter enables/disables the space periodic updates
Neighbor Filter
This parameter enables/disables neighbor filtering. Neighbor filtering helps you
to filter routes from specific neighbors.
Auto-summary status This parameter enables/disables the auto-summary feature.
Default metric
This parameter specifies the default metric. The allowed value ranges between 1
and 16. The default value is 3.
To Next Page
Loading...
