1D-56 Engine Mechanical:
• Install the left oil return pipe (6).
• Install a new O-ring (7) and shim (8).
• Install a new gasket and the oil sump filter (9).
CAUTION
!
Replace the gasket and O-ring with new ones to prevent oil leakage.
• Install a new gasket and the oil pan.
CAUTION
!
Replace the oil pan gasket with a new one to prevent oil leakage.
• Install a new gasket washer (10) to the oil pan bolt (11) as shown.
CAUTION
!
Use a new gasket washer to prevent oil leakage.
• Tighten the oil pan bolts to the specified torque.
Tightening torque
Oil pan bolt: 14 N·m (1.4 kgf-m, 10 lb-ft)
6
7
8
9
I649G1140165-02
10
11
I649G1140359-01
I649G1140360-01
To Next Page
Loading...
