Suzuki 2005 GSF1200 - Dimmer Switch Inspection

9B-12 Lighting Systems:
4) After finishing the passing light switch inspection,
reinstall the removed parts.
Dimmer Switch Inspection
B649G19206031
Inspect the dimmer switch in the following procedures:
1) Remove the right frame head cover. (GSF1200)
Refer to “Exterior Parts Removal and Installation: in
Section 9D”.
2) Disconnect the left handlebar switch coupler (1).
3) Inspect the dimmer switch for continuity with a tester.
If any abnormality is found, replace the left
handlebar switch assembly with a new one.
Refer to “Handlebars Removal and Installation: in
Section 6B”.
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
4) After finishing the dimmer switch inspection, reinstall
the removed parts.
1
I649G1920036-01
Position
Color
Dbr Dg G/B
HI
LO
I649G1920039-01