Suzuki 2005 GSF1200 - Horn Removal and Installation

Combination Meter / Fuel Meter / Horn: 9C-8
3) Inspect the horn button for continuity with a tester.
If any abnormality is found, replace the left
handlebar switch assembly with a new one.
Refer to “Handlebars Removal and Installation: in
Section 6B”.
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
Horn Inspection
1) Disconnect the horn coupler (1).
2) Connect a 12 V battery to terminal “A” and terminal
“B”. If the sound is not heard from the horn, replace
the horn with a new one.
3) Connect the horn coupler.
Horn Removal and Installation
B649G19306028
Removal
1) Disconnect the horn coupler (1).
2) Remove the horn (2) by removing the mounting bolt.
Installation
Install the horn in the reverse order of removal.
I310G1930024-01
1
I649G1930023-01
“A”
“B”
I649G1930026-01
1
2
I649G1930025-01