Suzuki 2005 GSF1200 - Specifications; Service Data; Tightening Torque Specifications; Special Tools and Equipment

1H-11 Ignition System:
Specifications
Service Data
B649G11807002
Electrical
Unit: mm (in)
Tightening Torque Specifications
B649G11807003
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque Specifications: in Section
0C”.
Special Tools and Equipment
Recommended Service Material
B649G11808001
Special Tool
B649G11808002
Item Specification Note
Ignition timing
7° B.T.D.C. at 1 300 r/min. E-28
7° B.T.D.C. at 1 200 r/min. Others
Firing order 1 ⋅ 2 ⋅ 4 ⋅ 3
Spark plug
Type NGK: JR9B
Gap 0.6 – 0.7 (0.024 – 0.028)
Spark performance Over 8 (0.3) at 1 atm.
CKP sensor resistance Approx. 130 – 200 Ω Tester range: (x 100 Ω)
CKP sensor peak voltage 1.0 V and more
Ignition coil resistance
Primary
(+) tap – (–) tap
Approx. 2 – 4 Ω
Tester range: (x 1 Ω)
Secondary
Spark plug cap – Spark plug cap
Approx. 30 – 40 kΩ
Tester range: (x 1 kΩ)
Ignition coil primary peak voltage 140 V and more
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
CKP sensor rotor bolt 25 2.5 18.0 )
Material SUZUKI recommended product or Specification Note
Sealant SUZUKI Bond 1207B or equivalent P/No.: 99000–31140 ) / )
Thread lock cement Thread Lock Cement 1342 or
equivalent
P/No.: 99000–32050 )
09900–25008
Multi-circuit tester set
) / ) / ) / ) / )