Suzuki 2005 GSF1200 - Carburetor Assembly Removal and Installation

Fuel System: 1G-19
Carburetor Assembly Removal and Installation
B649G11706002
Removal
1) Remove the seat and frame covers. Refer to
“Exterior Parts Removal and Installation: in Section
9D”.
2) Remove the fuel tank. Refer to “Fuel Tank Removal
and Installation: ”.
3) Remove the air cleaner box mounting bolts.
4) Disconnect the TP sensor coupler (1).
5) Loosen the respective carburetor clamp screws.
6) Move the air cleaner box backward.
7) Disconnect the carburetor heater lead wire coupler
(2). (For E-02, 19)
8) Remove the thermo-switch (3). (For E-02, 19)
9) Disconnect the starter cable (4) and throttle cables
(5).
10) Disconnect the vacuum hose (6).
11) Remove the carburetor assembly.
Installation
Install the carburetor assembly in the reverse order of
removal. Pay attention to the following points:
• Position the carburetor clamps as shown.
I649G1170028-01
1
I649G1170029-02
I649G1170030-02
2
3
I649G1170031-02
4
5
6
I649G1170032-01
I649G1170033-01