Steering / Handlebar: 6B-12
Specifications
Tightening Torque Specifications
B649G16207001
NOTE
The specified tightening torque is also described in the following.
“Handlebars Components: ”
“Steering Components: ”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque Specifications: in Section
0C”.
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Handlebar holder bolt 23 2.3 16.5 )
Steering stem nut
45 4.5 32.5
then turn back 1/2 – 1/
4. )
Steering stem head nut 65 6.5 47.0 )
Handlebar holder set nut 45 4.5 32.5 )
To Next Page
Loading...
