Suzuki 2005 GSF1200 - Fastener Removal and Installation; Exterior Parts Removal and Installation

Exterior Parts: 9D-5
Fastener Removal and Installation
B649G19406003
Removal
1) Depress the head of fastener center piece (1).
2) Pull out the fastener (2).
Installation
1) Let the center piece stick out toward the head so that
the pawls “A” close.
2) Insert the fastener into the installation hole.
NOTE
To prevent the pawl “A” from damage, insert
the fastener all the way into the installation
hole.
3) Push in the head of center piece until it becomes
flush with the fastener outside face.
Exterior Parts Removal and Installation
B649G19406004
Seat
Removal
1) Unlock the seat with the ignition key.
2) Remove the front and rear seats as an assembly.
Installation
Slide the seat hooks into the seat hook retainers and
push down firmly until the seat snaps into the locked
position.
Frame Cover
Removal
Remove the frame covers (1), left and right.
1
2
I649G1940005-01
“A”
I649G1940006-01
I649G1940007-01
“A”: Hooked point
I649G1940008-01
I649G1940009-01
1
“A”
I649G1940010-03