Drive Chain / Drive Train / Drive Shaft: 3A-9
Specifications
Service Data
B649G13107002
Drive Chain
Unit: mm (in)
Tightening Torque Specifications
B649G13107003
NOTE
The specified tightening torque is also described in the following.
“Drive Chain Related Components: ”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque Specifications: in Section
0C”.
Item Standard Limit
Final reduction ratio 3.000 (45/15) —
Drive chain
Type RK GB50GSVZ3 —
Links 116 links —
20-pitch length — 319.4 (12.57)
Drive chain slack 20 – 30 (0.8 – 1.2) —
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Engine sprocket nut 115 11.5 83.0 )
Speed sensor rotor bolt 20 2.0 14.5 )
Rear sprocket nut 60 6.0 43.5 )
To Next Page
Loading...
