Suzuki 2005 GSF1200 - Rear Turn Signal Light Removal and Installation; Turn Signal Light Bulb Replacement

Lighting Systems: 9B-9
Rear Turn Signal Light Removal and Installation
B649G19206023
Removal
1) Remove the seat. Refer to “Exterior Parts Removal
and Installation: in Section 9D”.
2) Remove the tool set (1) and disconnect the turn
signal light coupler (2).
3) Remove the turn signal light (3) by removing the nut.
Installation
Install the rear turn signal light in the reverse order of
removal.
Turn Signal Light Bulb Replacement
B649G19206024
CAUTION
!
If you touch the bulb with your bare hands,
clean the bulb with a cloth moistened with
alcohol or soapy water to prevent premature
bulb failure.
1) Remove the lens by removing the screw.
2) Replace the bulb (1).
3) Install the lens.
1
2
I649G1920031-01
3
I649G1920032-01
I649G1920033-01
1
I649G1920034-01