Suzuki 2005 GSF1200 - Charging System

1J-1 Charging System:
Charging System
General Description
Charging System Description (Generator with IC Regulator)
B649G11A01001
The generator features a solid-state regulator that is mounted inside the generator. All regulator components are
enclosed into a solid mold, and this unit is attached to the brush holder frame. The regulator voltage setting cannot be
adjusted.
Two brushes carry current through the two slip rings to the rotor coil which is mounted on the rotor.
The stator windings are assembled on the inside of a laminated core that forms part of the generator housing. A
rectifier bridge, which is connected to the stator windings, contains eight diodes, and electrically changes the stator
A.C. voltage to D.C. voltage which appears at the generator output terminal.
IG
B
B
P
F
IG
IG
E
E
Stator coil
Rotor coil
Ignition switch
IC
Battery
Load
1 2
3
4
5
6
7
6
B
P
B
F
B
I649G11A0001-01
1. Rotor 4. Slip rings 7. Brush holder F: Rotor coil terminal
2. Rotor coil 5. Brushes B: Battery terminal IG: Ignition terminal
3. Stator coil 6. IC regulator E: Ground P: Stator coil terminal