Suzuki 2005 GSF1200 - Rear Wheel Dust Seal; Bearing; Removal and Installation

Wheels and Tires: 2D-13
Bearing
Inspect the play of the wheel bearings by hand while
they are in the wheel. Rotate the inner race by hand to
inspect for abnormal noise and smooth rotation. Replace
the bearing if there is anything unusual. Refer to “Rear
Wheel Dust Seal / Bearing / Removal and Installation: ”.
Rear Wheel Dust Seal / Bearing / Removal and
Installation
B649G12406022
Removal
1) Remove the rear wheel assembly. Refer to “Rear
Wheel Assembly Removal and Installation: ”.
2) Remove the rear sprocket mounting drum assembly
from the rear wheel. Refer to “Rear Sprocket / Rear
Sprocket Mounting Drum Removal and Installation:
in Section 3A”.
3) Remove the dust seal (1).
Special tool
(A): 09913–50121 (Oil seal remover)
4) Remove the bearings (2) using the special tool.
Special tool
(B): 09921–20240 (Bearing remover set)
5) Remove the spacer (3).
Installation
CAUTION
!
The removed dust seal and bearings must be
replaced with new ones.
1) Apply SUZUKI SUPER GREASE “A” to the wheel
bearings.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
I649G1240015-01
1
(A)
I649G1240031-01
2
(B)
I649G1240032-01
3
I649G1240033-01
I649G1240019-01