9E-4 Body Structure:
Side-stand Removal and Installation
B649G19506004
Removal
1) Support the motorcycle with the center stand.
2) Remove the side-stand as shown in the side-stand construction. Refer to “Side-stand Construction: ”.
Installation
Install the side-stand as shown in the side-stand construction. Refer to “Side-stand Construction: ”.
Center Stand Construction
B649G19506005
Center Stand Removal and Installation
B649G19506006
Removal
1) Support the motorcycle using a jack.
CAUTION
!
Make sure that the motorcycle is supported securely.
2) Remove the center stand as shown in the center stand construction. Refer to “Center Stand Construction: ”.
Installation
Install the center stand as shown in the center stand construction. Refer to “Center Stand Construction: ”.
2
2
1
I649G1950004-01
1. Center stand 2. Spring : Apply grease to sliding surface.
To Next Page
Loading...
