Ignition System: 1H-4
Repair Instructions
Ignition Coil and Spark Plug Cap Components
B649G11806007
Spark Plug Removal and Installation
B649G11806017
Refer to “Spark Plug Removal and Installation: in
Section 0B”.
Spark Plug Inspection and Cleaning
B649G11806018
Refer to “Spark Plug Inspection and Cleaning: in
Section 0B”.
Ignition Coil Inspection
B649G11806008
Refer to “Electrical Components Location: in Section
0A”.
Ignition Coil Primary Peak Voltage
1) Remove the fuel tank. Refer to “Fuel Tank Removal
and Installation: in Section 1G”.
2) Disconnect all the spark plug caps.
3) Connect new spark plugs (1) to each spark plug cap
and ground them on the cylinder.
NOTE
Be sure that all the spark plugs are
connected properly and the battery used is in
fully-charged condition.
#4
#1
#3
#2
1
2
3
FWD
FWD
I649G1180002-04
1. Frame 2. Plug cap cover 3. Plug cap
1
I649G1180003-01
To Next Page
Loading...
