Suzuki 2005 GSF1200 - Page 135

Engine Mechanical: 1D-67
4) Select a left-side thrust bearing from the selection table.
NOTE
Right-side thrust bearing has the same specification as the GREEN (12228-48B00-0E0) of left-side
thrust bearing.
Left-side thrust bearing selection table
5) After selecting a left-side thrust bearing, install it and then measure the thrust clearance again.
Clearance before inserting
the left-side thrust bearing
Color “A” (Part No.) Thrust bearing thickness Thrust clearance
2.42 – 2.44 mm
(0.0953 – 0.0961 in)
Black
(12228-48B00-0H0)
2.36 – 2.38 mm
(0.0929 – 0.0937 in)
0.04 – 0.08 mm
(0.0016 – 0.0031 in)
2.44 – 2.46 mm
(0.0961 – 0.0969 in)
Orange
(12228-48B00-0G0)
2.38 – 2.40 mm
(0.0937 – 0.0945 in)
2.46 – 2.48 mm
(0.0969 – 0.0976 in)
Blue
(12228-48B00-0F0)
2.40 – 2.42 mm
(0.0945 – 0.0953 in)
2.48 – 2.50 mm
(0.0976 – 0.0984 in)
Green
(12228-48B00-0E0)
2.42 – 2.44 mm
(0.0953 – 0.0961 in)
2.50 – 2.52 mm
(0.0984 – 0.0992 in)
Yellow
(12228-48B00-0D0)
2.44 – 2.46 mm
(0.0961 – 0.0969 in)
2.52 – 2.54mm
(0.0992 – 0.1000 in)
Red
(12228-48B00-0C0)
2.46 – 2.48 mm
(0.0969 – 0.0976 in)
2.54 – 2.56 mm
(0.1000 – 0.1008 in)
Brown
(12228-48B00-0B0)
2.48 – 2.50 mm
(0.0976 – 0.0984 in)
2.56 – 2.57 mm
(0.1008 – 0.1012 in)
Pink
(12228-48B00-0A0)
2.50 – 2.52 mm
(0.0984 – 0.0992 in)
0.04 – 0.07 mm
(0.0016 – 0.0028 in)
“A”: Color code
“A”
I649G1140345-01