Exterior Parts: 9D-7
3) Remove the combination meter assembly (1). Refer
to “Combination Meter Removal and Installation: in
Section 9C”.
4) Remove the wind screen (2) and upper panel (3).
5) Disconnect the turn signal lead wire couplers and
remove the turn signal lights (4), left and right. Refer
to “Front Turn Signal Light Removal and Installation:
in Section 9B”.
6) Remove the cowling (5) along with the lower panel
(6).
7) Remove the lower panel (6) from the cowling (5).
8) Disconnect the headlight and position light couplers.
9) Remove the headlight assembly (7).
10) Remove the cowling brace (8).
1
I649G1940017-01
2
3
I649G1940018-01
4
I649G1940029-01
5
I649G1940020-01
6
I649G1940019-01
5
6
I649G1940021-01
7
I649G1940022-01
8
I649G1940023-01