Maintenance and Lubrication: 0B-19
Specifications
Tightening Torque Specifications
B649G10207001
NOTE
The specified tightening torque is also described in the following.
“Chassis Bolt and Nut Inspection: ”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque Specifications: in Section
0C”.
Special Tools and Equipment
Recommended Service Material
B649G10208001
Special Tool
B649G10208002
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Spark plug 11 1.1 8.0 )
Exhaust pipe bolt 23 2.3 16.5 )
Muffler mounting bolt 23 2.3 16.5 )
Muffler connecting bolt 23 2.3 16.5 )
Oil drain plug 23 2.3 16.5 )
Oil filter 20 2.0 14.5 )
Rear axle nut 100 10.0 72.5 )
Rear master cylinder rod lock-nut 18 1.8 13.0 )
Material SUZUKI recommended product or Specification Note
Brake fluid DOT 4 — ) / )
09900–20803 09900–20805
Thickness gauge Tire depth gauge
) / ))
09915–40610 09917–14920
Oil filter wrench Valve adjuster driver
) / ))
09930–10121
Spark plug wrench set
)
To Next Page
Loading...
