ELECTRICAL SYSTEM 10-33
Rear turn signal light
• Remove the center frame cover. (9-15)
• Remove the socket
1.
• Remove the bulb
2.
• Install the turn signal light in the reverse order of removal.
Brake light/taillight
• Remove the center frame cover. (9-15)
• Remove the socket holder plate
1 and socket
2.
• Remove the bulb
3.
• Install the brake light/taillight in the reverse order of removal.
License light
• Remove the lower frame cover. (9-15)
• Remove the lens
1.
• Remove the bulb
2.
• Install the license light in the reverse order of removal.
To Next Page
Loading...
General
