4-4 DRIVE TRAIN
• Remove the gascket
3 and dowel pins.
• Remove the following gears.
A Final drive gear
B No.1 gear
C No.2 gear
D No.3 gear
E Final driven gear
• Remove the final drive gear hub
4.
INSPECTION AND REPLACEMENT
GEARS
Inspect the gears for wear and damage.
If any defects are found, replace the gear with a new one.
OIL SEALS
Inspect the oil seals for wear and damage.
If any defects are found, replace the seal with a new one.
To Next Page
Loading...
