ENGINE 3-45
CRANK BALANCER
DISASSEMBLY
• Remove the circlip
1, washer
2, spring
3 and scissors gear
4.
REASSEMBLY
• Carry out the assembly procedure in the reverse order of dis-
assembly while observing the following instructions.
• Assemble the scissors gear with its punch mark side the out-
side.
• When assembling, align the balancer driven gear hole
A with
the scissors gear hole
B.
• Install the springs
5.
• Install the washer
6 and circlip
7.
DRIVESHAFT
DISASSEMBLY
• Remove the driveshaft nut.
• Remove the washer
8, spring stopper
9, dumper cam spring
0, cam dog
A, final driven gear
B, and driveshaft oil seal
C.
To Next Page
Loading...
