Suzuki AN650 2002 - Final Gear Oil; Transmission Oil

PERIODIC MAINTENANCE 2-15
TRANSMISSION OIL
TRANSMISSION OIL REPLACEMENT
• Keep the motorcycle upright with the center stand.
• Place an oil pan below the mission case.
• Remove the oil drain plug
1 and filler plug 2.
• Tighten the drain plug
1 to the specified torque, and pour
fresh oil through the oil filler.
• Remove the oil level plug
3 and inspect the oil level. If the
level is below the level hole, add oil until oil flows from the
level hole.
P Oil viscosity and classification
: SAE 10W-40 with API SF or SG
• Tighten the oil level plug
3 and filler plug 2 to the specified
torque.
! Oil level plug:12 N·m (1.2 kgf-m, 8.5 lb-ft)
Drain plug: 12 N·m (1.2 kgf-m, 8.5 lb-ft)
Oil filler plug: 12 N·m (1.2 kgf-m, 8.5 lb-ft)
 NECESSARY AMOUNT OF TRANSMISSION OIL
Oil change: 360 ml (12.2/12.7 US/lmp oz)
Overhaul: 400 ml (13.5/14.1 US/lmp oz)
FINAL GEAR OIL
FINAL GEAR OIL REPLACEMENT
• Keep the motorcycle upright with the center stand.
• Remove the final gear case cover
1.
• Place an oil pan below the final gear case.
Replace initially at 1 000 km (600 miles, 1 month) and
every 12 000 km (7 500 miles, 12 months) thereafter.
Inspect every 6 000 km (4 000 miles, 6 months) there-
after.
Replace initially at 1 000 km (600 miles, 1 month) and
every 12 000 km (7 500 miles, 12 months) thereafter.