Suzuki AN650 2002 - Engine Removal; Engine Removal and Remounting

ENGINE 3-3
ENGINE REMOVAL AND REMOUNTING
ENGINE REMOVAL
• Drain the engine oil and transmission oil. (2-10, 2-13)
• Drain the engine coolant. (2-20)
NOTE:
If the engine is stained, clean with steam cleaner before
removal.
• Cover the parts,
A and B, to prevent water from entering the
CVT unit.
EXTERNAL PARTS
• Remove the following parts: (9-6)
• Lower leg shield. Front leg shield cover. Leg shield. Front box.
Maintenance lid. Lower frame cover. Center frame cover. Pil-
ion rider handle. Trunk box cover. Frame cover. Foot board.
Trunk box. Rear fender. Leg side cover.
• Remove the final gear case cover. (10-48)
• Disconnect the battery terminals. (10-3)

•
Disconnect the joint hose
1
and breather hose
2.
• Remove the air cleaner box
3.
Remove the battery terminals from the
- side first.