ENGINE 3-25
CAM CHAIN TENSION ADJUSTER
INSPECTION
• Remove the cam chain tension adjuster cap bolt.
• Check that the push rod slides smoothly when releasing stop-
per.
• If it does not slide smoothly, replace the cam chain tension
adjuster with a new one.
CAM CHAIN TENSIONER
INSPECTION
• Check the contacting surface of the cam chain tensioner.
• If it is worn or damaged, replace it with a new one.
CAM CHAIN GUIDE
INSPECTION
• Check the contacting surfaces of the cam chain guides.
• If they are worn or damaged, replace them with the new ones.
To Next Page
Loading...
