Suzuki AN650 2002 - Removal and Disassembly

DRIVE TRAIN 4-3
REMOVAL AND DISASSEMBLY
• Remove the right/left side leg shield cover. (9-12)
• Drain the final gear oil. (2-15)
• Remove the rear wheel. (9-48)
• Remove the swingarm. (9-59)
• Remove the speedometer sensor
1 and harness guide 2.
• Remove the final gear case.
• Remove the bearing from the engine.
• Remove the dowel pins.
• Remove the final gear case bolts in a crisscross pattern.