2-16 PERIODIC MAINTENANCE
• Remove the oil drain plug
2 and oil level plug
3.
• Tighten the oil drain plug
2 to the specified torque, and pour
fresh oil through the oil level hole until the oil over flows from
the oil level hole.
! Drain plug: 33 N·m (3.3 kgf-m, 24.0 lb-ft)
• Tighten the oil level plug
3 to the specified torque.
! Oil level plug: 33 N·m (3.3 kgf-m, 24.0 lb-ft)
P Oil viscosity and classification
: Hypoid gear oil SAE #90 API grade GL-5
NECESSARY AMOUNT OF FINAL GEAR OIL
Oil change: 300 ml (10.1/10.6 US/lmp oz)
Overhaul: 430 ml (14.5/15.1 US/lmp oz)
CVT FILTER
• Remove the leg side cover. (9-12)
• Remove the CVT filter lid
1.
✩: hooked part
• Remove the CVT filter cover
2.
• Remove the CVT filter
3.
Inspect every 12 000 km (7 500 miles, 12 months).